Air Operated Double Diaphragm Pump is a commonly used industrial pump product, widely used in chemical industry, petroleum, pharmaceutical, food, environmental protection and other fields. It has a wide range of uses, and below we will detail some of the main uses for diaphragm pumps.   1.Chemical industry Air Diaphragm Pumps are widely used in all aspects of liquid transportation and processing in the chemical industry, such as transporting acid and alkali solutions, highly corrosive media, flammable and explosive liquids, etc. Because the air diaphragm pump has good sealing performance and can effectively prevent leakage, it is safer and more reliable in the transportation of flammable and explosive liquids.   2. Petroleum industry Air Diaphragm pumps are mainly used in the petroleum industry to transport oil, natural gas, liquefied gas and other media. Due to the particularity of the petroleum industry, air diaphragm pumps need to be corrosion-resistant, high-tem...

Air double diaphragm pump is a pump that uses a special diaphragm to separate liquids from moving parts. It can transport various types of liquids by changing its volume. The working principle of the diaphragm pump is mainly based on the reciprocating movement of the diaphragm. This movement is achieved by pneumatic movement, which in turn causes the diaphragm to move to the inside or outside of the pump chamber, thereby changing the volume in the pump chamber and achieving suction and discharge actions.   Air Diaphragm pump in food factory is a commonly used conveying equipment, its function is to convey liquid from one place to another. It uses a diaphragm structure to drive the flow of liquid through the action of compressed air. Air Diaphragm pumps in food factories are widely used in the food industry, and their uses mainly include the following aspects:                                  ...

A pneumatic diaphragm pump is a positive displacement pump driven by compressed air. With its unique structure and working principle, it is widely used in industrial fields and has many advantages. This article will analyze the advantages and attentions of pneumatic diaphragm pumps.   The advantages of pneumatic diaphragm pumps are mainly reflected in the following aspects:   1. Wide adaptability: Pneumatic diaphragm pumps are suitable for transporting various media, including liquids, colloids, particles, etc. Moreover, it can withstand high pressure and temperature and can adapt to the needs of various industrial environments.   2. Strong corrosion resistance: The pump body and diaphragm of the pneumatic diaphragm pump are made of corrosion-resistant materials, such as stainless steel, PP, PVDF, etc. This enables the pneumatic diaphragm pump to exhibit better stability and long life in the delivery of corrosive media.     3. High reliability: T...

Diaphragm air pump is a kind of pump with unique performance. It has simple structure, convenient operation and stable operation, and can be widely used in various fields. In the chemical industry, diaphragm pumps play an important role. This article will introduce in detail the application and advantages of diaphragm pumps in the chemical industry.                           Applications in chemical industry:   1.Acid and alkali transportation: In chemical production, it is often necessary to transport various acid and alkali liquids. Due to its corrosion resistance, the pp diaphragm pump can effectively prevent leakage and corrosion of acid and alkali liquids, ensuring the safety and stability of the production process.   2. Transportation of flammable and explosive liquids: For flammable and explosive liquids, there are certain safety hazards in using traditional pumps to transport them. Due to ...

The role of air operated diaphragm pump has been greatly appreciated by people in the industry. Because the pneumatic diaphragm pump plays an important role in the transportation of dangerous and corrosive media, how should it be used correctly to increase the service life of the pneumatic diaphragm pump? What are the methods of use?   1. Installation and startup: ​ Place the air membrane pump as close to the product as possible, so that the suction pipeline is short and the number of configured parts is reduced. Do not reduce the pipeline diameter. In order to extend the life of the diaphragm, keep the pump as close as possible to the liquid being pumped. When the inlet pressure exceeds 10 feet (3 meters) of liquid column, a pressure relief adjustment device needs to be installed to extend the life of the diaphragm. If hard piping is installed, use a short length of flexible connection between the pump and the pipe. Flexible connection can reduce vib...

Air pipes and suction pipes are indispensable accessories for pneumatic diaphragm pumps. How are they installed? What should you pay attention to? This article will introduce them to you.   1. Installation of Air pipe The diameter of the suction pipe of the diaphragm air pump should not be smaller than the diameter of the pump inlet. It is necessary to use an unbent suction pipe at the inlet side so that a high vacuum state can occur. The diameter of the outlet pipe should be at least equal to the outlet diameter, or slightly larger to reduce resistance and losses. All pipes and joints must be sealed, otherwise the self-priming capacity of the pump will be reduced.   Pneumatic diaphragm pump device: If the details of the device are ignored, it may lead to unsafe pumping effects and affect the service life of the pump.   Purpose: The orientation of the double diaphragm pump must be convenient for use and facilitate daily inspection and debugging by maintenance p...

Electric diaphragm pumps and pneumatic diaphragm pumps are two common industrial pumps. The following are the differences between them in terms of energy drive, operating principle and applications:   1. Energy drive and operating principle: Electric diaphragm pump：It is a diaphragm pump that uses electrical energy to drive the pump. It is mainly composed of a series of components such as motor, reducer, clutch, diaphragm pump, and sensor. The electrically driven reducer is a primary component that reduces the speed of the electric motor to a speed that can drive the diaphragm pump. Electric diaphragm pumps are powered by an electric motor, converting energy into mechanical motion to drive the diaphragm to work. Its working principle is based on the reciprocating piston principle, and is connected to the diaphragm through a motor-driven connecting rod to realize the suction and discharge of liquid.   Pneumatic diaphragm pump：It is a pump that use compresse...

Pneumatic diaphragm pump is a common fluid transportation equipment, widely used in chemical, pharmaceutical, food and other industries. Correct use and maintenance can extend the service life of the Air Operated Diaphragm Pump(AODD), improve work efficiency and reduce the occurrence of failures. The following is how to use and maintain a pneumatic diaphragm pump.       How to use: 1.Pre-operation inspection: Before using the pneumatic double diaphragm pump, you need to check whether the outside of the pump is damaged or blocked by foreign matter, confirm whether the connecting pipes are loose, and ensure that the working environment is well ventilated.   2. Air source preparation: Connect the appropriate air source, and set the appropriate air pressure according to the equipment specifications and requirements, usually in the range of 0.2-0.7MPa.   3. Medium preparation: Ensure that the conveying medium meets the working requirements of the pump. For medi...

Air Double Diaphragm Pump is a common industrial pump that delivers liquid through pneumatic. The characteristic of this pump is that an elastic diaphragm is set inside the pump body to separate the inlet and outlet, and the diaphragm is periodically vibrated by the action of compressed air to promote the flow of liquid.   Important parts: 1.Pump body: usually made of Plastic, Aluminum alloy, SS304&SS316, TEFLON,PVDF, it has corrosion resistance and pressure resistance, and can withstand the transportation of different media.   2. Diaphragm: Located inside the pump body, it is made of elastic material( Teflon, Santoprene, Hytrel, Viton) and can be completely isolated from the liquid to prevent leakage and contamination.   3. Inlet and outlet valves: Located on both sides of the pump body, the flow direction and speed of the liquid are adjusted by controlling the opening and closing of the valves.   4. Driving device: usually a pneumatic piston, which generates v...