Diaphragm Rod (Shaft) from #321 stainless steel, the connecting rod has good corrosion resistance, abrasion resistance, and self-lubricating performance. Particularly grinded, the surface has lower friction coefficient.
AOK15 Polypropylene air diaphragm pump is a kind of air operated double diaphragm pump for sulphuric acid with good chemical stability, has strong acid and alkali corrosion resistance.
Quick Connector is a joint that can connect or disconnect pipes without tools. The operation is simple, time saving and manpower saving when disconnecting and connecting with quick connector.
1Inch booster Air operated membrane pump is often used for sewage, slurry, gasoline, and diesel oil etc. With high pressure and high capacity, has the self priming function with wet priming 8m.
Mini polypropylene pneumatic pump is a pump which driven by air. The air pump can be widely used in NAOH, sulfuric acid etc. It has the self priming function and can run dry.
Pneumatic coupling refers to air filter and pressure reducing valve. The pressure reducing valve can stabilize the pressure of the gas source, so that the gas source is in a constant state, which can reduce the damage to the valve or actuator and other hardware when the air pressure of the gas source changes abruptly. The filter is used to clean the air source. It can filter the water in the compressed air and avoid the water entering the device with the gas.
AOE aluminum air driven pump with simple structure, less wearing parts, At the same time, the slurry double diaphragm pump is a kind of corrosion resistant pneumatic diaphragm pump, And it can transport viscosity within the range of 10000 centipoises of liquid.
Stainless steel aodd pump can be used as mobile material delivery pump. 25mm stainless steel aodd pump is not only small in size, but also easy to move, no need for foundation, small footprint, simple and economical installation.
The role of connecting rod is to connect the piston and the crankshaft, so that the reciprocating linear motion of the piston into the rotary motion of the crank, in order to output power.