Pulsation Dampeners

High pressure booster air powered membrane pump is a kind of excellent performance, has more corrosion resistance, more wear resistance, more high temperature resistance and other high-quality pneumatic diaphragm pump.

AOK40 PVDF pneumatic diaphragm pump powered by compressed air, when the 1.5 Inch Compressor Air Diaphragm Pump exhaust is an expansion endothermic process. And the AOK40 PVDF self priming pneumatic duplex diaphragm pump working temperature is reduced, no harmful gas discharge. 

Diaphragm has Teflon (PTFE), Viton, Buna-n, Neoprene, Santoprene, EPDM, etc. materials. That is imported material, the diaphragm stress of air operated diaphragm pump is reduced to the minimum, and the service life is extended.

Diaphragm Rod (Shaft)  from #321 stainless steel, the connecting rod has good corrosion resistance, abrasion resistance, and self-lubricating performance. Particularly grinded, the surface has lower friction coefficient. 

AOK50 high flow flap valve Air Operated Diaphragm Pump liquid flow is spacious and good through performance, It is a Large particle passing capacity diaphragm pump, It has a strong capacity for the passage of large solid particles. allowing passage of solid particles with a maximum particle diameter of 40 mm. This aluminum alloy flap valve air operated diaphragm pump is very popular in chemical industry. 

1/4 inch mini polypropylene pneumatic diaphragm pump has six advantages, such as reliable quality, long service life, low noise, small vibration, high head, never crash and fine workmanship.

The valve seat materials are Teflon, Santoprene, Buna-n, etc.

Pneumatic coupling refers to air filter and pressure reducing valve. The pressure reducing valve can stabilize the pressure of the gas source, so that the gas source is in a constant state, which can reduce the damage to the valve or actuator and other hardware when the air pressure of the gas source changes abruptly. The filter is used to clean the air source. It can filter the water in the compressed air and avoid the water entering the device with the gas.