Air Pump Parts Diaphragm Rod (Shaft)

Diaphragm has Teflon (PTFE), Viton, Buna-n, Neoprene, Santoprene, EPDM, etc. materials. That is imported material, the diaphragm stress of air operated diaphragm pump is reduced to the minimum, and the service life is extended.

The pump body installed with muffler, the delivery head and flow can pass the pneumatic valve open to realize the step less adjustment,  Effectively reduce air duct noise.

The valve seat materials are Teflon, Santoprene, Buna-n, etc.

The O-ring is also called the sealing ring, It is a kind of rubber sealing ring with circular cross section, which is the most common mechanical design for sealing.

The valve ball materials are Teflon, Santoprene, EPDM, ect. It has a very low friction coefficient, excellent self-lubrication, good corrosion resistance, dimensional stability, and no deformation.

AOK40 PVDF pneumatic diaphragm pump powered by compressed air, when the 1.5 Inch Compressor Air Diaphragm Pump exhaust is an expansion endothermic process. And the AOK40 PVDF self priming pneumatic duplex diaphragm pump working temperature is reduced, no harmful gas discharge. 

Pneumatic coupling refers to air filter and pressure reducing valve. The pressure reducing valve can stabilize the pressure of the gas source, so that the gas source is in a constant state, which can reduce the damage to the valve or actuator and other hardware when the air pressure of the gas source changes abruptly. The filter is used to clean the air source. It can filter the water in the compressed air and avoid the water entering the device with the gas.   

The LL316 stainless steel pneumatic diaphragm pump offers a wide range of fluids from low to high viscosity and low to high corrosion. The stainless steel LL316 air operated diaphragm pump is suitable for conveying high viscosity honey in medicine and chemical industry and food industry.