AODD Pump Valve Seat

Diaphragm has Teflon (PTFE), Viton, Buna-n, Neoprene, Santoprene, EPDM, etc. materials. That is imported material, the diaphragm stress of air operated diaphragm pump is reduced to the minimum, and the service life is extended.

The pump body installed with muffler, the delivery head and flow can pass the pneumatic valve open to realize the step less adjustment,  Effectively reduce air duct noise.

The O-ring is also called the sealing ring, It is a kind of rubber sealing ring with circular cross section, which is the most common mechanical design for sealing.

The role of connecting rod is to connect the piston and the crankshaft, so that the reciprocating linear motion of the piston into the rotary motion of the crank, in order to output power.

The valve ball materials are Teflon, Santoprene, EPDM, ect. It has a very low friction coefficient, excellent self-lubrication, good corrosion resistance, dimensional stability, and no deformation.

316 food grade sanitary pneumatic diaphragm pump is a kind of excellent performance, has more corrosion resistance, more wear resistance, more high temperature resistance and other high-quality pneumatic diaphragm pump. For example, our sanitary pneumatic diaphragm pump can be used in the daily chemical industry.

Pneumatic coupling refers to air filter and pressure reducing valve. The pressure reducing valve can stabilize the pressure of the gas source, so that the gas source is in a constant state, which can reduce the damage to the valve or actuator and other hardware when the air pressure of the gas source changes abruptly. The filter is used to clean the air source. It can filter the water in the compressed air and avoid the water entering the device with the gas.   

1Inch booster Air operated membrane pump is often used for sewage, slurry, gasoline, and diesel oil etc. With high pressure and high capacity, has the self priming function with wet priming 8m.