Air Operated Diaphragm Pump Valve Ball

PVDF 1/2 inch plastic pneumatic diaphragm pump is a AOK15 PVDF pneumatic diaphragm pump with excellent characteristics. The PVDF pneumatic diaphragm pump not only has good chemical corrosion resistance, The PVDF mini air pump for chemical liquid also has high temperature resistance, oxidation resistance, weather resistance and other characteristics.

AOK50 high flow flap valve Air Operated Diaphragm Pump liquid flow is spacious and good through performance, It is a Large particle passing capacity diaphragm pump, It has a strong capacity for the passage of large solid particles. allowing passage of solid particles with a maximum particle diameter of 40 mm. This aluminum alloy flap valve air operated diaphragm pump is very popular in chemical industry. 

1Inch booster Air operated membrane pump is often used for sewage, slurry, gasoline, and diesel oil etc. With high pressure and high capacity, has the self priming function with wet priming 8m.

Diaphragm has Teflon (PTFE), Viton, Buna-n, Neoprene, Santoprene, EPDM, etc. materials. That is imported material, the diaphragm stress of air operated diaphragm pump is reduced to the minimum, and the service life is extended.

Mini polypropylene pneumatic pump is a pump which driven by air. The air pump can be widely used in NAOH, sulfuric acid etc. It has the self priming function and can run dry.

AOK80 3inch high volume reciprocating stainless steel pneumatic diaphragm pump in the work of the fluidstirring minimum, no heat occurs, the machine will not overheat. 

Air operated diaphragm pump is a kind of 1/2 Inch and 1inch standard pneumatic diaphragm pump using a new piezoelectric polymer material. The PVDF vacuum pump diaphragm is not only small density light weight, but also good flexibility, and has good chemical stability.

Pneumatic coupling refers to air filter and pressure reducing valve. The pressure reducing valve can stabilize the pressure of the gas source, so that the gas source is in a constant state, which can reduce the damage to the valve or actuator and other hardware when the air pressure of the gas source changes abruptly. The filter is used to clean the air source. It can filter the water in the compressed air and avoid the water entering the device with the gas.